Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MBM iBOOKLET
Summary of Contents for MBM iBOOKLET
- Page 1 Ver. A_2 Operation Manual iBOOKLET May 26,2017 MBM Corporation...
-
Page 2: Table Of Contents
Introduction Thank you for purchasing the iBOOKLET. The iBOOKLET is a tabletop booklet maker. Its major features include: - Comfort in operation supported by touch-type switches. - Support for two clinching methods to make a wide variety of booklets - Automated or manual booklet making is possible only by selecting paper size. - Page 3 Safety Precautions *The repair of a product that is damaged or malfunctions because of failure to follow the instructions in this manual may not be free of charge, even during the warranty period. Notes on Installation Do not install the product at a place where there is alcohol, thinner or other Warning volatile substances, or an open flame.
-
Page 4: Specifications
1. Specifications 1. General Specifications 1) Model iBOOKLET W19.3” x H14” x D18.7” (inch） 2) Main Unit Dimensions 3) Weight 44.1lb AC100‐240V（±10%) 0.7‐0.3A 50/60Hz 4) Main Power Supply 2. Bookmaking Specifications 13” ×18.4” ～ 4.3” × 8.3” (inch) 1) Paper Size 2) Number of Sheets 16 sheets (21.3 lbs..bonded paper base) -
Page 5: ２．Names Of Components
2. Names of Components 1) Front 2) Rear AC Inlet... -
Page 6: Rear ３．Accessories
3. Accessories Accessory Qty. Appearance Operation Manual (this document) Set of staples AC Power Cord Stocker... -
Page 7: ４．Steps For Operation (Process Flow From Preparation To Finish)
4. Steps for Operation (Process Flow from Preparation to Finish) 1) Preparation (i) Open the top cover. This cover serves as a table for setting paper. Paper width guide (ii) Connect the accompanying power supply cord to the AC inlet to supply the designated power for the machine. -
Page 8: Operation Panel
5. Functions 1) Operation Panel (1) Counter (i) In Count Up mode, the panel displays the number of copies counted. In Count Down mode, the panel displays the value calculated by subtracting the number counted from the preset value. (ii) When changing the paper size, the panel displays the change made within the range of +/- 0.2 inch for four seconds. - Page 9 (5) Staple & Fold (i) When Side Stapling is selected, the product binds on the side of paper. Press the Side Stapling switch twice to adjust the stapling position within the range of 0.30 inch to 0.60 inch, using the positive (+) and negative (-) keys to change the value.
-
Page 10: ６．Regular Maintenance
3) Staple Heads (1) The product is equipped with two staple heads, with a 3.54 inch case each. (2) You may unfasten the wing bolts and change them with 5.31 inch or 7.08 inch cases. (3) For corner stapling, remove the head that will not be used, unplug the sensor connector, and then insert the connector in the connector catch. -
Page 11: Cleaning The Exterior Of The Product 3) Recommendation For Regular Maintenance ７．Troubleshooting
7. Troubleshooting Problem Cause Action The product cannot be Is the power cord connected properly? Turn the power switch off and powered on. securely plug the cord into the outlet. Check connection connector on the rear side of the product is not loose. Use the power cord accompanied Is the power cord used appropriately? with the product. - Page 12 Operation Manual iBOOKLET Keep this Operation Manual with care in a fixed storage place so that it may be available whenever required. When the Operation Manual is stained or lost, contact the distributor or a person in charge in our sales office to ask for a new one.
Need help?
Do you have a question about the iBOOKLET and is the answer not in the manual?
Questions and answers