Accessing History Values; Tank Assembly - Pentair OMNIFILTER OM26K Manual

SYSTEM DISINFECTION continued
2 . Salt tank softeners
A . Backwash the softener and add the required amount of
hypochlorite solution to the well of the salt tank . The salt
tank should have water in it to permit the solution to be
carried into the softener .
B . Proceed with the normal recharge .
Calcium Hypochlorite
Calcium hypochlorite, 70% available chlorine, is available
in several forms including tablets and granules . These solid
materials may be used directly without dissolving before use .
1 . Dosage
A . Two grains (approximately 0 .1 ounce [3 ml]) per cubic
foot .
2 . Salt tank softeners
A . Backwash the softener and add the required amount
of hypochlorite to the well of the salt tank . The salt tank
should have water in it to permit the chlorine solution to
be carried into the softener .
B . Proceed with the normal recharge .

ACCESSING HISTORY VALUES

The control features a review level that displays the operation
history of the system . This is a great troubleshooting tool for
the control valve .
To access history values, press Recharge
Salt Amount button and hold for 3 seconds to view the
Diagnostic Codes .
NOTE: If a button is not pushed for 30 seconds the
controller will exit the history table.
Press the Time of Day button
table . When the desired code is reached, Press the Salt
Amount button to display the value .
Some of the values have four digits 1, 2, 3, 4 . Press the Salt
Amount button to display the first two (1, 2). Press the
Water Hardness button to display the last two (3, 4) .
When the Salt Amount button
current flow rate will be displayed but not updated. Continue to
press and release the Salt Amount button
to update the display. The flow dot on the display will flash
when there is flow thru the softener.
Code Description
H1 Days since last recharge
H2 Current flow rate
H3 Current day of week
H4 Water used today since 0200
H5 Water used since last recharge
A0 Average water usage for day 0
A1 Average water usage for day 1
A2 Average water usage for day 2
A3 Average water usage for day 3
A4 Average water usage for day 4
A5 Average water usage for day 5
A6 Average water usage for day 6
followed by the
to increment through the
is pressed to view H2 the
every 5 seconds
Notes
Days since last recharge
Gallons per minute
Current day of week
In gallons,
max value displayed 9999
max value stored 65,535 .

TANK ASSEMBLY

1
D
Item No. QTY Part No.
1 . . . . . . . . . . . 1 . . . . . . .4001927 . . . . . . . . . Resin Tank Assy, 8 x 44,
A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resin Tank, 8 x 44
B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower Distributor Assembly
C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Upper Basket
D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conditioning Resin
C
A
B
Description
OM26K
8 x 44 Tank
OM26K • 13