Raisecom ISCOM5508 Hardware Description page 25

www.raisecom.com


Appearance of SC/PC fiber connector is shown as below.
User doesn't need to rotate when plugging in and pulling out SC/PC fiber connector, the specific
operations are shown as below:


Appearance of FC/PC fiber connector is shown as below.
User doesn't need to rotate when plugging in and pulling out FC/PC fiber connector, the specific
operations are shown as below:


When plugging fiber in, aligning optical interface with fiber head and plugging it in with
suitable strength.
When pulling fiber out, pressing the clip connector and push the plug in a little, and then pull
the fiber out.
Figure 3-2 SC/PC fiber connector
When plugging fiber in, aligning optical interface with fiber head and plugging it in with
suitable strength.
When pulling fiber out, pressing the clip connector and push the plug in a little, and then pull
the fiber out.
Figure 3-3 FC/PC fiber connector
When plugging fiber in, aligning fiber head to optical interface carefully, don't damnify the
inner tube inside optical interface, rotate screw clockwise when the fiber touches bottom and
then tighten optical interface.
When pulling fiber out, contrarotate the screw at first, pull the fiber out when screw is loose
enough.
User Manual
17