Timer - Samsung NZ84T9770EK User Manual

Operation

Timer

Using the timer as a safety shutoff:
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking
zones simultaneously.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
20 English
NZ84T9770EK_EU_DG68-00630B-00_EN.indd 20
1. After switched on, press the
corresponding cooking zone button
to activate the flash signal for the
corresponding cooking zone display.
2. Press the Timer button. The number
10 will be displayed above the timer
display.
3. Press the Timer setting buttons
( or ) or turn the magnetic knob to
set the desired time. The safety shutoff
is now activated.
NOTE
The timer can be adjusted from 0 to 99.
4.
To display the time remaining for any of the cooking zones, use the Timer
button.
The corresponding cooking zone display will begin to blink slowly.
The settings are reset using the Timer setting buttons (
period of time has elapsed, the cooking zone automatically switches itself off, an
acoustic signal sounds as confirmation and the timer display indicates.
NOTE
If you press the Timer button without selecting a cooking zone, the display
turns on but no timer settings is applied.
NOTE
To change the settings quicker, touch and hold any of the
desired value is reached.
To cancel the timer settings, press the
target cooking zone button, and then
press and hold the Timer botton for
2 seconds. This will cancel the cooking
zone's timer settings with a beep. If
holding down the Timer button for 2
seconds without selecting a burner, this
will cancel the timer settings of the last
changed burner.
or ). After the set
or buttons until the
2020-02-25 12:35:18