Topics:
•
Removing the SAS Backplane
•
Installing the SAS Backplane
Removing the SAS Backplane
1. Follow the procedures in
Before Working Inside Your
2. Remove the
front
bezel.
3. Remove the cover.
4. Remove the
cooling
shroud.
5. Remove the
optical
drive.
6. Remove the
hard drive
carrier.
7. Remove the
hard-drive
assembly.
8. Disconnect the SAS cables.
9. Push the blue release tabs in the direction of the arrows marked on the hard-drive housing assembly. Slide the backplane upwards.
Related tasks
Installing the SAS Backplane
Installing the SAS Backplane
1. Push the blue release tabs and insert the backplane in the slot along the hard-drive assembly.
2. Connect the SAS cables.
3. Install the
hard drive
assembly.
4. Install the
hard drive
carrier.
20
SAS Backplane
Computer.
SAS Backplane
8