Invacare Formula PTO Plus Service Manual page 79

Adjusting Lateral Depth
NOTE: For this procedure, refer to
FIGURE 14.10.
1. Remove the two flat screws that secure
the lateral support pad to the bracket.
2. Reposition the bracket to the other set
of mounting holes in the lateral
support.
3. Install the two flat screws to secure the
lateral support pad to the bracket.
Adjusting Lateral Width
NOTE: For this procedure, refer to FIGURE 14.11 on page 80.
NOTE: To adjust lateral width, a different size bracket must be installed.
1. Note the depth mounting position of the lateral support pad.
2. Remove the two flat screws that secure the lateral support pad to the existing bracket.
3. Remove the two socket screws that secure the existing bracket to the hinge.
4. Align the mounting holes in the new bracket with the mounting holes in the hinge.
5. Use the two socket screws to secure the new bracket to the hinge.
6. Secure the lateral support pad to the new bracket with the two flat screws.
Part No 1125031
Half Clamp
Socket Screws
FIGURE 14.9 Adjusting Lateral Height
Lateral
Support
Back Cane
Lateral Support Pad
Mounting
Holes
FIGURE 14.10 Adjusting Lateral Depth
79
Formula
SECTION 14—BACK
Flat Screws
Bracket
™
PTO Plus Powered Seating