Scan Variables; List Scan Settings (List S); Set Rate (Rate); Set Frames Per Scan (Fps) - Scanivalve MPS4264 Hardware And Software Manual

MPS4264

Scan Variables

List Scan Settings (LIST S)

DESCRIPTION
SYNTAX
RETURNS
EXAMPLE

Set Rate (RATE)

DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE

Set Frames Per Scan (FPS)

DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE
Returns all of the scan settings
LIST S
All of the scan setting followed by the prompt.
LIST S
SET RATE 5.0000
SET FPS 0
SET UNITS PSI 1.000000
SET FORMAT T F,F B,B B
SET TRIG 0
SET ENFTP 0
SET OPTIONS 0 0 16
>
Set the scan rate in samples/channel/second (Hz)
SET RATE <rate in HZ>
Where rate is the number of samples per seconds for all 64 channels
Prompt when ready to accept a new command
SET RATE 5
>
5
.25 to 850
Set the number of frames in a scan
SET FPS <number of frames>
Where <number of frames> is the number of frames in a scan. When set to 0 the scan
continues until the STOP command is issued.
Prompt when ready to accept a new command
SET FPS 100
>
0
0 to 4294967295
53
Section 5: Software