Apm Configuration - Asus P5N73-CM Manual

2.5.1. ACPI.Suspend.Type.[S1&S3]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Configuration options: [S1(POS)] [S3(STR)] [S1&S3]
2.5.2. ACPI.APIC.Support.[Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)
support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI
APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
2.5.3

APM Configuration

Restore.on.AC.Power.Loss.[Power.Off]
When set to Power Off, the system goes into off state after an AC power loss. When set to
Power On, the system goes on after an AC power loss. When set to
Configuration options: [Power Off] [Power On] [Last State]
PWR.Button.<.4.secs.[Instant-Off]
Allows you to set the event after the power button is pressed for more than 4 seconds.
Configuration options: [Suspend] [Instant-Off]
Power.On.By.PCI/PCIE.Devices.[Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE devices & NV
Onboard LAN. Configuration options: [Disabled] [Enabled]
Power.On.By.External.Modems.[Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when the
external modem receives a call while the computer is in Soft-off mode. Configuration options:
[Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power.On.By.RTC.Alarm.[Disabled]
Allows you to enable or disable the power on by RTC alarm.
Configuration options: [Disabled] [Enabled]
The following items become user-configurable when the Power.On.By.RTC.Alarm item is
set to [Enabled].
Date (of Month) Alarm [0]
To set the date of alarm, highlight this item and press <Enter> to display the Date
of Month Alarm pop-up menu. Key-in a value within the specified range then press
<Enter>. Configuration options: [Min=0] [Max=31]
ASUS P5N73-CM 2-19