Exit.menu - Asus P5N73-CM Manual

2.8.

Exit.menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main Advanced
Exit & Save Changes
Exit & Discard Changes
Load Setup Default
Discard Changes
F1:Help
ESC: Exit
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Exit.&.Save.Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select YES to save changes and exit.
If you attempt to exit the Setup program without saving your changes, the program
prompts you with a message asking if you want to save your changes before exiting. Press
<Enter> to save the changes while exiting.
Exit.&.Discard.Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Load.Setup.Defaults.
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select YES to load default values. Select Exit & Save Changes or make other changes
before saving the values to the non-volatile RAM.
Discard.Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select YES to discard any
changes and load the previously saved values.
2-24
Phoenix-Award BIOS CMOS Setup Utility
Power Boot Tools
↑↓ : Select Item -/+: Change Value
→←: Select Menu Enter: Select SubMenu
Exit
Select Menu
Item Specific Help
Item Specific Help
This option save data
This option save data
to CMOS and exiting
to CMOS and exiting
the setup memu. the setup menu.
Select Menu
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup