Asus P5N73-CM Manual page 38

11.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
P5N73-CM Azalia Analog Front Panel Connector
• We recommend that you connect a high-definition front panel audio module to this
• If you want to connect a high-definition front panel audio module to this connector, set
12.. Floppy.disk.drive.connector.(34-1.pin.FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end
of the cable to this connector, then connect the other end to the signal connector at the
back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when using an
FDD cable with a covered Pin 5.
P5N73-CM
P5N73-CM
1-28
P5N73-CM
connector to avail of the motherboard's high-definition audio capability.
the Front.Panel.Type item in the BIOS setup to [HD.Audio]..If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD.Audio]..See section 2.4.3 Onboard Devices Configuration for
details.
Floppy Disk Drive Connector
Azalia-compliant
pin definition
AAFP
FLOPPY
PIN1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
Legacy AC'97-compliant
pin definition
Chapter 1: Product introduction