Watchguard AP420 Hardware Manual page 10

WatchGuard AP420 Hardware Guide
Console Port
Standard RJ45 connector for serial console access.
USB Port
The USB port is currently not in use.
Reset Button
Resets the WatchGuard AP to factory-default settings. You must use a paper clip or other small
object to press the reset button through the small hole on top of the device.
To reset the device to factory-default settings, press and hold the reset button for up to 10 seconds
until all LEDs go off to indicate that the device has rebooted.
Kensington Security Lock Slot
Kensington security lock slot for use with a security cable to secure your device.
6 WatchGuard Technologies, Inc.