Advertisement
Quick Links
For replacement parts visit
WENPRODUCTS.COM
Your new tool has been engineered and manufactured to WEN's highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
MITER SAW STAND
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
Model # MSA750
bit.ly/wenvideo
(M-F 8AM-5PM CST)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Wen MSA750
Summary of Contents for Wen MSA750
- Page 1 WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
- Page 2 Specific Rules For The Miter Saw Stand Know Your Miter Saw Stand Assembly & Adjustments Operation Warranty TECHNICAL DATA Model Number: MSA750 Tubular Legs and Crossbars Diameter: 1.8 in. Extension Rail Support Distance: 34 in. (minimum) 69 in. (maximum) Height to Saw Mounting Base: 29.5 in.
- Page 3 GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1.
- Page 4 GENERAL SAFETY RULES 13. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position before plugging in the power cord. 14. REMOVE ADJUSTMENT TOOLS. Always make sure all adjustment tools are removed from the saw before turning it on. 15.
- Page 5 If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email techsupport@wenproducts.com. Miter Saw Stand: Part Number Description Qty. MSA750-001 Work Support Roller Mounting Hardware: Saw Mounting Bracket MSA750-002 Assembly...
- Page 6 ASSEMBLY & ADJUSTMENTS Remove all loose parts from the carton. If you find any pieces that are missing or incorrect, do not op- erate the tool until the parts have been replaced. Failure to do so could result in serious personal injury.
- Page 7 ASSEMBLY & ADJUSTMENTS CHECKING AND ADJUSTING THE CLAMPING PRESSURE The clamping pressure of each saw mounting bracket should be checked before it is attached to a miter saw. To Check The Clamping Pressure: When fitted across the two main crossbars with the locking handle in the down (locked) position, a bracket should be firm and exhibit no signs of movement.
- Page 8 OPERATION MOUNTING A MITER SAW TO THE STAND (CONTINUED) 5. Hook the front of the brackets over the front of the miter stand’s tubular crossbar (Fig. 12). 6. Push the back of the brackets down to engage them onto the back crossbar (Fig. 13). 7.
- Page 9 LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
- Page 10 THANKS FOR REMEMBERING...
Need help?
Do you have a question about the MSA750 and is the answer not in the manual?
Questions and answers