Wen WA600 Instruction Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Racks & Stands
  5. WA600
  6. Instruction manual
Wen WA600 Instruction Manual

Wen WA600 Instruction Manual

600-pound capacity clamping sawhorse
Hide thumbs
Table of Contents

Advertisement

Quick Links

MODEL WA600
600-POUND CAPACITY
CLAMPING SAWHORSE
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-800-232-1195 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WA600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wen WA600

Summary of Contents for Wen WA600

  • Page 1 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    CONTENTS WELCOME Introduction ..................... 3 Specifications ....................3 SAFETY General Safety Rules ..................4 BEFORE OPERATING Know Your Clamping Sawhorse ................6 Assembly & Adjustment ................... 7 OPERATION & MAINTENANCE Operation ......................8 Maintenance ....................10 Exploded View & Parts List ................11 Warranty Statement ..................

  • Page 3: Welcome

    INTRODUCTION Thanks for purchasing the WEN Clamping Sawhorse. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool.

  • Page 4: Safety

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 5 GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Before Operating

    KNOW YOUR CLAMPING SAWHORSE TOOL PURPOSE Clamp, rip, bend, and shape with ease using your clamping sawhorse. Refer to the following diagrams to become familiarized with all the parts of your clamping sawhorse. The components will be referred to later in the manual for assembly and operation instructions.

  • Page 7: Assembly & Adjustment

    ASSEMBLY & ADJUSTMENTS ASSEMBLING THE CLAMPING SAWHORSE Fig. 1 1. Fit the rear carry handle (Fig. 1 - 1) into the welded brack- et and fasten the handle into position with the bolt and lock- ing knob. SETTING UP THE CLAMPING SAWHORSE 1.

  • Page 8: Operation & Maintenance

    OPERATION CLAMPING Fig. 6 1. Place the workpiece against the fixed jaw pad (Fig. 6 - 1). 2. Slide the moving jaw (Fig. 6 - 2) up against the work- piece. The moving jaw can be moved by hand or by using the foot pedal (Fig.
  • Page 9 OPERATION NOTES CONTINUED: Fig. 9 • To clamp a workpiece 22.5 in. - 40 in. in size, re-position the moving jaw in reverse and unscrew the moving jaw handle. Do not try to clamp large, uneven workpiec- es that may force the moving jaw to bend/warp as it clamps.

  • Page 10: Maintenance

    MAINTENANCE ROUTINE INSPECTION Before each use, inspect the tool. If any of these following conditions exist, do not use until parts are replaced. Check for: • Loose hardware or improper mounting • Misalignment • Cracked or broken parts • Any other condition that may affect its safe operation CAUTION! Most plastics are susceptible to damage from various types of commercial solvents.

  • Page 11: Exploded View & Parts List

    EXPLODED VIEW & PARTS LIST...
  • Page 12 EXPLODED VIEW & PARTS LIST PART NO. DESCRIPTION QTY. PART NO. DESCRIPTION QTY. WA600-001 Clamp Body WA600-036 M4x40 Cross Head Screw WA600-002 Sliding Jaw WA600-037 Lock Block WA600-003 Front Cover WA600-038 Lock Pawl Pin WA600-004 Clamping Pedal WA600-039 Lock Pawl...

  • Page 13: Warranty Statement

    (2) years from date of purchase or 500 hours of use; whichever comes first. Ninety days for all WEN products if the tool is used for professional or commercial use.
  • Page 14 NOTES...
  • Page 15 NOTES...
  • Page 16 THANKS FOR REMEMBERING V. 2019.09.11...

Table of Contents