Models Covered By This Manual; Electric Fencing And Your Energizer - Tru-Test Mkll Unigizer 1 J User Manual

Hide thumbs Also See for Mkll Unigizer 1 J:
Table of Contents

Advertisement

ENGLISH
Models covered by this
manual
This manual covers various
models:
1 J model
1000 / X1 / 401
2 J model
2000 / X2 / 402
3 J model
3000 / X3 / 403
Models can be identified as MkII by examining
the label affixed to the rear of the energizer.
Electric fencing and your
energizer
Congratulations on the purchase of your
energizer. This product has been constructed
using the latest technology and construction
techniques. It has been engineered to give
superior performance and many years of
service.
It is important to read these instructions
carefully and thoroughly. They contain
important safety information and will assist you
in ensuring that your electric fencing system
gives maximum performance and reliability.
Parts
2
MkII
energizer
Warning!
- USA and Canada - To reduce the risk of
electric shock, the energizer's power
adaptor may have a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way.
- Switch the energizer off before installation
or performing any work on the fence.
- Read all the safety considerations
Safety considerations
carefully. See
page 11.
- Check your installation to ensure that it
complies with all local safety regulations.
- Europe - When the temperature is below
5 °C, the energizer must be located in a
shelter and any cables attached, in
particular, must not be handled.
- Do not connect simultaneously to a fence
and to any other device such as a cattle
trainer or a poultry trainer. Otherwise,
lightning striking your fence will be
conducted to all other devices.
- Use only the mains/line power adaptor or
battery leads supplied with this energizer
or a genuine replacement part.
- The power input socket on the back of the
energizer is for 12 V DC only.
Notes:
-
This product has been designed for use
with electric animal fences.
-
Keep these instructions in a handy location.
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mkll unigizer 2 jMkll unigizer 3 j

Table of Contents