To Remove The Front Panel; About The Air Filters; To Clean The Air Filters - Daikin Siesta ATXM20N2V1B User Reference Manual

Hide thumbs Also See for Siesta ATXM20N2V1B:
Table of Contents

Advertisement

7.4 To remove the front panel

7.5 About the air filters

7.6 To clean the air filters

ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
1 Hold the front panel by the panel tabs on both sides and open it.
a
Panel tabs
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a
a
Front panel shaft
Operating the unit with dirty filters means that the filter:
CANNOT deodorize the air,
CANNOT clean the air,
poor heating/cooling,
causes odour.
1 Push the tab at the centre of each air filter, then pull it down.
2 Pull out the air filters.
1
Note: (class 50) The titanium apatite deodorizing filter MUST be removed before
cleaning the air filter.
3 Remove the titanium apatite deodorizing filter from all 4 claws.
7
Maintenance and service
|
a
User reference guide
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Siesta atxm25n2v1bSiesta atxm35n2v1bSiesta atxm50n2v1b

Table of Contents