Solid State Drive; Removing The Primary M.2 Solid-State Drive - Dell Precision 7550 Service Manual
Hide thumbs
Also See for Precision 7550:
- Service manual (102 pages) ,
- Setup and specifications manual (45 pages) ,
- Connection manual (10 pages)
Table of Contents
Advertisement
Steps
1. Connect the battery cable to the connector in the battery.
2. Place the battery onto its slot in the computer.
3. Replace the three (M2x5) screws to secure the battery to the computer.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Solid State Drive
Removing the primary M.2 Solid-state drive
Prerequisites
NOTE:
For computers shipped with M.2 2280 or 2230 SSD installed in slot 3 and/or slot 5.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The figure indicates the location of the primary M.2 SSD and provides a visual representation of the removal procedure.
28
Disassembly and reassembly
after working inside your
computer.
before working inside your
computer.
Advertisement
Table of Contents
