IBM Academic System 6152 Quick Reference page 27

Remove a Power-On Password
To remove your power-on password, turn on the computer. When the
password prompt appears, type your current password, then press
the key located above the right Alt key, and press Enter.
[,-------..lOOOOOOOOO~
1
o
Dr
JGQ
0
Forget the Power-On Password?
To remove the power-on password because you forgot it, you must
remove the battery from inside the system unit for at least 20 minutes
to erase the memory containing your password. (See page 39 for
instructions on removing the battery.)
Set the Network Server Mode
If your computer is a server on a network, you can set a network
server mode. Your computer can now be turned on so other
computers on the network can access your fixed disk drive while your
keyboard is locked.
Before setting a network server password you must first set a
power-on password (see page 15). After setting a power-on
password, set the network server mode by going to the Main Menu of
the Reference Diskette and selecting "Set features," then "Set
passwords. "
Then select "Set network server mode" and follow the instructions on
the screen.
Remove the Network Server Mode
To remove the network server mode, start the backup copy of the
Reference Diskette (see page 14). Go to the main menu and select
"Set features," then "Set passwords." Then select" Set network
server mode." When you are asked "Set network server mode?"
press N and Enter.
16
Introducing the IBM Academic System 6152