Advertisement
Repeat for opposite side. (Install Stopper Base &
5
Sub Stopper) (PHOTO 2.5)
NOTE: Be careful to not get injured by the
screws, for wiring, underneath the rolling base.
(Two pieces on leftside of board.) (PHOTO 2.6)
SCREWS FOR WIRING
6
Route wire harness as pictured to avoid problems. (PHOTO 2.7)
Keep the wireharness away from
the screw head.
7
Reinstall all items removed by reverse.
131
Page
4 of 4
PHOTO 2.5
PHOTO 2.6
PHOTO 2.7
Advertisement
