Identification And Operation Of Controls - Toshiba V-S46 Owner's Manual

IDENTIFICATION AND OPERATION OF CONTROLS
FRONT PANEL
"TVIVCR" Switch
TV: Used for normal operation of the TV set
when VCR is not in use or for recording a
program while watching another. (When
turning on or off the VCR, "TVIVCR"
switch is automatically
set
to "TV" position.)
VCR: Used to watch the playback picture or t o
"STOP" Button
monitor the program being recorded. (When
Push "STOP" button while the
set
is operating, the the "PLAY" button is pressed, the
running of tape stops and all operating modes are
"TVIVCR" switch is automatically
set
to
cancelled. the "VCR" position.)
Note: The red lamp will light when the "TVIVCR"
switch i s in "VCR" positi
Cassette Compartment
When a cassette is inserted in this compartment,
the cassette will automatically be ready for opera-
tion. The cassette indicator lamp will light.
-.
.
Avoid inserting anything into .the cassette
compartment except a cassette.
"EJECT"
Button
Used to remove the cassette from the cassette
compartment.
"POWER" Switch
Turns VCR power
'
on and off.
/
"PLAY" Button
Press for playing back recorded tape.
/
When the switch is pressed to off, there will
be a delay of
2
seconds before the VCR is
actually off.
Infrared Remote Control Receiver
To receive infrared signals from a Remote Control
Unit.