Countdown; Stopwatch; Phone Finder; Settings - Technaxx TX-SW3HR User Manual

Countdown

Stopwatch

Phone finder

Settings

Power-Off

Hold down the crown button for 2 seconds. The smartwatch vibrates
before turning off.

Hints

⚫ Bluetooth connection becomes disconnected when the device
exceeds a certain distance. ⚫ Reconnect with Bluetooth if Bluetooth
does not work for more than 5 min. ⚫ Before binding the bracelet to
another account, you need to unbind it with the current account. ⚫ If
the bracelet cannot be illuminated, connect the bracelet to the
charger.
Swipe left until you see this icon. Tap this icon to enter
this option. Select a Time and press start to begin a
countdown.
Swipe left until you see this icon. Tap this icon to enter
this option. Press start to begin. Press reset for a lap time
and stop and reset to zero the stopwatch
Swipe left until you see this icon. Tap this icon to enter
this option. Now the Smartwatch send a notificiation to
your phone and it begin to ring. Note: If there is no
Bluetooth connection, the option is not available
Swipe left until you see this icon. Tap this icon to enter
this option. Here you can change the brightness / lcd time
and see the system informations. Reset is also available
over this option.