Technaxx Video Watch Compass HD 4GB User Manual Please find the Declaration of Conformity for this device under following internet-link: www.technaxx.de//konformitätserklärung/video_watch_compass_hd_4gb Charging and low battery status 1. This watch has a built-in rechargeable Li-battery which can be charged by connecting the watch’s USB interface with adapter or computer USB interface.
Page 2
Operation Methods 1. Turning camera ON Press and hold down the Power/Video-Photo-Audio button for two seconds. The red light and blue light both turn on at the same time. The red light turns off while the blue light keeps on shining (it indicates power on and standby time mode). 2.
Page 3
Then the PC camera can be used. 3. Update date and time of the video: Connect the device to your computer and run the tool „WriteTime.exe“ from the included CD. You can also download the tool from: http://www.technaxx.de/support/drivers/WriteTime.zip Choose the correct drive letter:...
Click “Update” and then “OK”. Close the tool and disconnect the device. 4. Quit USB device: a. Double-click the Windows Interface "Safely Remove Hardware" icon (lower right corner of the green arrow). b. Select "Stop" in "Safely Remove Hardware" dialog box. c.
Page 5
Video recording function; Compass function; Audio/Sound recording function (with an extra waterproofed cap for the Supports microphone button); Standard PC camera function (need to install the provided driver) Feature Protected against water, dirt, dust, rain, snow Windows Vista / XP / ME / 2000 / Mac OS 9.2.2 or higher version, no need to install a driver (Windows98 need a driver installation) Security and Disposal Hints for Batteries...
Need help?
Do you have a question about the Video Watch Compass HD and is the answer not in the manual?
Questions and answers