CORREC T U S E
Shaft height is wrong
Shaft height is correct
It is very important to adjust the shaft to your
Adjust the height of the shaft so that you are
height correctly to be able to search without
standing in an upright position, your arm is
discomfort and fatigue.
relaxed and the search coil is approximately
5cm (~2'') above the ground.
CORRECT WAY OF SW E EP I NG
Wrong search coil angle
Wrong search coil angle
Correct search coil angle
Incorrect way of sweeping
Correct way of sweeping
It is important to keep the search coil
The search coil must be parallel to the
parallel to the ground in order to get
ground at all times.
accurate results.
5
Need help?
Do you have a question about the Simplex+ and is the answer not in the manual?