Sony XBR43X800H Manual page 417

Help Guide | The message [Panel refresh did not finish] is displayed. (only models equipped with an OLED panel)
Getting Started
Watching TV
Using the TV with Other Devices
Connecting to a Network
Settings
Troubleshooting
Index
E-180-100-12(1)
Copyright 2020 Sony Corporation
file:///C/Users/1000025409/Desktop/HTML_PDF%20Files/Help_E180100121_XBR43X800H_EN/E180100121.w/en-003/08-02-31_05.html[2/4/2020 12:05:24 PM]
Help Guide
>
OLED panel (only models equipped with an OLED panel)
>
The message [Panel refresh did not finish] is displayed. (only models equipped
with an OLED panel)
The message [Panel refresh did not
finish] is displayed. (only models
equipped with an OLED panel)
Panel refresh automatically runs after the TV has been used for a long
period of time to reduce image retention. If the TV is turned on, the AC
power cord (mains lead) is unplugged, or the ambient temperature falls
outside of the range between 10°C (50°F) and 40°C (104°F) during the
panel refresh, the process will not complete and this message will appear.
If panel refresh started automatically, it will restart when you turn off
the TV with the remote control.
If panel refresh was initiated manually, you must select it again.
>
OLED panel (only models equipped with an OLED panel)
>
The message [Panel refresh did not finish] is displayed. (only models equipped
with an OLED panel)
> >
Troubleshooting Picture (quality)/screen
> >
Troubleshooting Picture (quality)/screen
Search
Print
Go to page top
410