Blodgett RE-42 Specifications

MODEL RE-42
Electric Series Oven
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Roll-In with pan racks
RPR-20, with center divider and 10 racks
Racks for pan rack L9
Electric Options
Single phase wiring (208/240 volt)
2 speed motor (208/240 volt)
Electric buzzer with mechanical timer (each)
Conventional Rack-type Options
Stainless steel center divider
Rack guides (set of 2)
Racks (each)
6" (152mm) stainless steel legs
Transport cart option (CTRE)
Roll-In with dolly basket (DBRI-L)
Project
Item No.
Quantity
Does not include rack, rack supports and center divider. Rolling equipment
must be selected from Available Options List.
All data is shown per oven section, unless otherwise indicated.
EXTERIOR CONSTRUCTION
INTERIOR CONSTRUCTION
OPERATION
STANDARD FEATURES
*
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Stainless steel front, back, top, and sides
One set of independent interlocking doors.
Heavy chrome plated tubular steel door handle
Vitreous fiber insulation at top, back, sides, bottom and doors.
29" x 41" x 28-1/4" (737mm x 1041mm x 718mm) oven compartment interior .
Porcelain-enameled steel baking compartment liner
2 sets of 3 tubular-type heaters
Direct acting snap - action thermostats
Slide vent - each section
2-1/3 HP blower motor operation, single speed
Two 60 minute timers
Two year oven parts and one year labor warranty*
Five year limited door warranty*
For all international markets, contact your local distributor.