Initial Setup - VacPak-It VMC20F Manual

CAUTION:
DO NOT IMMERSE IN WATER
To provide continued protection against risk
of electric shock, connect to properly
grounded outlets only.

Initial Setup

Filling Oil And Draining Oil
Be Cautious! Do not damage the machine.
• No oil is in a new machine.
• Pump will be damaged if it is running without oil.
• Before starting the machine, please ensure the oil level in the pump is past the fill line.
• Filling the oil from other positions of pump may damage the pump.
• Only add oil into the pump through the oil port.
• Do not inhale any gas expelling from the pump during operation. Doing so can be
harmful to your health.
• Always use the machine in an area that is not confined and has good ventilation.
1. Attach the power cord to the unit and plug the cord into a grounded electrical outlet.
2. Release the lid lock, located on the right side of the machine, and allow
the lid to lift and remain open.
NOTE: Do not use the machine with the lid lock engaged.
Always release the lid lock before use. The lid lock feature is only
to be used when the machine is in storage, never while in use.
3. Press the ON/OFF Button on the control panel to turn the machine on. The LED screen
on the control panel will illuminate, confirming the machine is on.
If below necessary conditions could not be met during the installation, it will cause the
machine damage. Please must follow with below necessary conditions to install the
machine.
Please make sure the environment where the machine is being installed conforms to
safety regulations .
• No flammable or explosive gas surrounding.
• Suitable temperature range: 41-105 Fahrenheit. If installation environment is out of this
range, please contact the supplier.
• Make sure the power supply is 120V
• Keep the machine at an upright position when moving or in transit. If the machine is
tipped over it will damage the pump.
• Keep the machine on a flat, level surface.
• Maintain a distance of 4" between the unit and walls or other objects for ventilation.
• Keep the machine away from any heat sources or steaming devices (such as fryers,
ovens, dishwashing machines or stoves)
BE CAUTIOUS!
Do not damage the machine .
ATTENTION:
NE PAS IMMERGER .
Pour assurer une protection continue contre
les risques de choc électrique, branchez à une
prise correctement mise à la terre.
5.