1 . Vacuum Gauge -
inside the chamber.
2 . "Cooling" Light -
It also illuminates during the cooling process.
3 . "Sealing" Light -
It also illuminates during the sealing process.
4 . "Gas" Light -
Set to 0.0 seconds.
5 . "Vacuum" Light -
It also illuminates during the vacuum process.
6 . LED Display -
7 . Set Button -
then use the up/down arrow buttons to make adjustments.
8 . Down & Up Arrow Buttons -
vacuum, sealing, or cooling time.
9 . Stop Button -
bag immediately.
4.
1
2 3 4 5
Indicates the vacuum pressure level
Illuminates when adjusting the cooling time.
Illuminates when adjusting seal time.
This unit does not have a gas flush option.
Illuminates when adjusting the vacuum time.
Displays current cycle time in seconds.
Press to set the vacuum or sealing time,
Press to stop the vacuum cycle and seal the
VACUUM
GAS
SEALING
COOLING
Down
Set
7
8
Press to decrease/increase the
Up
Stop
9
6