Instructions for Use
Dust Bag Installation & Removal
Note: Do not operate the cleaner without a dust bag.
WARNING! Always switch off the cleaner and remove the battery before installing or
removing the dust bag.
10.
1.
Open the body of the cleaner by unzipping the dust bag cover zips.
2.
Lift the Dust Bag Release Button to release the dust bag collar
holder.
3.
To remove the dust bag, slide the dust bag collar out from the dust
bag collar holder. If the dust bag is full, dispose of the dust bag and
replace with a new dust bag.
4.
To install the dust bag, insert the dust bag collar into the dust bag
collar holder by following the direction of the arrow, as shown. Fold
back the dust bag collar holder until it clicks back into place. The
body of the cleaner can now be zipped back up and the vacuum is
now ready for use.
(continued)