Advertisement
Quick Links
Advertisement
Related Manuals for Hoover HU86-ZP-M
Summary of Contents for Hoover HU86-ZP-M
- Page 1 Zoom Pet Upright User Guide HU86-ZP-M Version 1.0...
-
Page 2: Table Of Contents
CONTENTS Contents Machine Overview General Safety Information Operation Maintenance FAQs Other Information Notes... -
Page 3: Machine Overview
MACHINE OVERVIEW Unit Handle Telescopic extension tube Dirt container release button Power on/off button Separator Dirt container Post-motor filter cover Hose to machine connector Carpet height adjuster Handle release button Quick release cord wrap Hose Cord 3-in-1 crevice, dust and upholstery tool TurboTool Pre-motor filter... -
Page 4: General Safety Information
GENERAL SAFETY INFORMATION This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. -
Page 5: Operation
OPERATION PLEASE READ SAFETY INFORMATION BEFORE USE (p3) Before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ position. Hold the vacuum cleaner firmly when starting and in use. Assembling your upright Insert the backbone into Insert the cord holder into Now take the small clip and the floorhead. - Page 6 NOTE: Please select the hard floor setting on the brushbar height adjustment dial when using on hard floor, vinyl or lino to ensure the brushbar is in the highest position to avoid damaging your floor. NOTE: This unit has a constantly rotating brushbar. Hoover recommends you raise the brushbar before attaching accessories.
-
Page 7: Maintenance
MAINTENANCE NOTE: Wash filters with warm water (40°C max) at least every 3 months for best cleaning results. Emptying and cleaning the dirt container Press dirt container release Hold dirt container over Close the base of the dirt button to remove the dirt a bin and unclip the lock container and click dirt container. - Page 8 MAINTENANCE Cleaning the shroud 40˚C 24hr Wash the shroud under Turn the dirt container Remove the pre-motor filter Tap the shroud over a bin running water and leave lid anti-clockwise to allow access to the shroud. to release dirt. to dry. to remove.
- Page 9 MAINTENANCE IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. Removing debris from brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar.
- Page 10 MAINTENANCE Changing the belt Lift the brushbar from the Switch off your vacuum Remove the 9 screws from Remove the floorhead cover. machine to remove the belt. cleaner at the main socket the base of the floorhead Note: To remove debris from and unplug.
-
Page 11: Faqs
1 hour (if you have cleaned the filters you will need to wait 24 hours for the filters to dry before putting them back in the machine) What do I do if the unit becomes damaged or broken? • We’re here to help. Simply visit hoover.ae... -
Page 12: Other Information
HEPA (anti-bacterial) Post-motor filter Subject to technical change without notice. EEC Statement of Compliance Manufacturer/EEC importer: Hoover Limited, hereby on our own responsibility, declare that the HU86-ZP-M series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste. -
Page 13: Notes
NOTES...
Need help?
Do you have a question about the HU86-ZP-M and is the answer not in the manual?
Questions and answers