Main Menu; Selecting The Test Protocol - Maico ERO-SCAN Operation Manual

10.4 Main Menu

Date & Time
Save Mode
and Test #
Start Left
Ear Test
Change Protocol
and Settings

10.5 Selecting the Test Protocol

Display 3
8106556 Rev. 10
Operation Manual ERO•SCAN
Display 2
The currently selected protocol is shown on the Main Menu (Display
2). To change the selected protocol press CHANGE at the Main
Menu. The Change Protocol display will appear (Display 3). Use the
CHANGE arrow buttons to change the selected protocol. Press
the UP arrow to return to the Main Menu to begin testing. Press the
SETUP to enter the setup menus.
For either DPOAEs or TEOAEs screener devices, there are two
default test protocols that vary by averaging time. Appendix B
contains complete information on protocol settings. For instructions
for customizing diagnostic protocols, review chapter 18 and 19.
NOTE: Screener default protocols cannot be customized. Diagnostic
protocols are customizable.
24
Selected Protocol
Battery Status
Start Right
Ear Test
TM
26/11/2018