Maico ERO-SCAN Operation Manual page 12

Printer Paper Out!
Time/Date Error
Indicator LEDs (lights):
NOISE / Orange
TEST / Yellow
READY / Green
CHARGE / Blue
8106556 Rev. 10
Indicates that printer paper has run out.
The clock is checked during power on to ensure it has not lost time and been reset.
In the case of clock reset, this message is shown. The user should set the correct
date/time.
The indicator labeled 'NOISE' provides a visual indication (AMBER) that the
noise level measured during the test exceeds a nominal threshold.
Also used to indicate some error conditions and when the outcome of test is
REFER, NOISY, or NO SEAL.
The indicator labeled 'TEST' provides a visual indication (YELLOW) that the
selected test is being performed. This indicator will remain on steady state during
the test function.
The indicator labeled 'READY' lets the user know that the instrument is not
currently performing a test function and that it is available to perform a test
function.
The indicator labeled 'CHARGE' provides a visual indication (BLUE) of the
battery recharging function and battery status. The rate of illumination of the
indicator provides a means of identifying the status of the charging function.
Operation Manual ERO•SCAN
10
TM
26/11/2018