General Safety Precautions; Connecting Power - Extreme Networks Summit X460-G2 Series Installation Note

Maintenance Safety
permanently attached to the equipment rack so that it is always available when you need to handle
ESD-sensitive components.
Install all cables in a manner that avoids strain. Use tie wraps or other strain relief devices.
●

General Safety Precautions

Do not try to lift objects that you think are too heavy for you.
●
When you install equipment in a rack, load heavier devices in the lower half of the rack first to
●
avoid making the rack top-heavy.
For Summit desktop equipment installations, do not place a monitor or other heavy objects on top of
●
the equipment. The chassis cover is not designed to support weight.
Use only tools and equipment that are in perfect condition. Do not use equipment with
●
visible damage.
Route cables in a manner that prevents possible damage to the cables and avoids causing accidents,
●
such as tripping.
Selecting AC Power Supply Cords
Extreme Networks does not include AC power input cords in the product box. To purchase a power
cord for your product and for your specific country, contact your local Extreme Networks Channel
Account Manager or Sales Manager, or purchase a cord from your local supplier.
To locate a Sales Manager or Partner in your region visit:
http://www.extremenetworks.com/how-to-buy/how-to-buy.aspx
Power cords that are used with AC-powered Summit X460-G2 series switches must meet the
following requirements:
The power cord must be agency-certified for the country of use.
●
The power cord must have an IEC320-C13 connector for connection to the switch or external power
●
supply.
The power cord must have an appropriately rated and approved wall plug applicable to the country
●
of installation.
For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm
●
minimum wire size is 16 AWG (1.0 mm

Connecting Power

For the specific ratings and input power requirements of each switch model, see the data sheet for the
Summit X460-G2 series switches at http://www.extremenetworks.com.
WARNING!
Be sure to satisfy the requirements listed in this section when you connect all Extreme Networks
equipment to power.
4
2
).
Summit X460-G2 Series Switches Installation Note
2
) minimum; over 6 feet, the