Installation; Attaching Mounting Rail To Cylinder - Rinnai Enduro XL SP250B Operation & Installation Manual

INSTALLATION

ATTACHING MOUNTING RAIL TO CYLINDER

The extra rail and fastenings are packed with the cylinder.
They are screwed into the rail mounting holes in the
cylinder.
Attach the rail using the bolts, washers and spring washers
in the order shown.
Ensure the feet on the rails face outwards
Ensure that the bolt is tightened sufficiently to flatten the
spring washer. This ensures that the bolt is adequately
tightened.
Rail
Washer
Bolt
Spring
Washer
Once the rail is attached and suitably tightened, continue
the installation as shown on the next pages.
Low Profile Roof Mounted OIM
Rinnai 19