FarmTek WD8045 Manual page 5

2
FRONT WHEEL ASSEMBLY (continued)
4. Attach one end of the front axle brace to the yoke
and axle support using one (1) M13x25 bolt, M10
flat washer, and M10 locknut. Secure in place as
shown in diagram A.
5. Slide one (1) wheel, large washer, and locknut in
that order onto each end of the axle as shown in
diagram B. Do not tighten the nuts at this time.
Parts List and Tools Required
Socket/Wrench Set
M10 Locknuts (1) M10 Washers (1)
Pliers
Revision date: 05.30.19
A
Locknuts (2)
Flat Washers (2)
Curved
End
Front Axle
Brace
B
M13x25 Bolt (1)
CARTS AND WAGONS
Wheels (2)
Front Axle Brace (1)
5