Advertisement
CARTS AND WAGONS
2
FRONT WHEEL ASSEMBLY
NOTE: Hardware may ship attached to parts.
1. Attach steering link to the front axle support
using two (2) M13x18 bolts, M10 flat washers,
and M10 locknuts to secure the support as
shown in diagram A.
2. Slide yoke onto the stud welded to the underside
of the top cross bar of the axle support. Secure
in place using a M11 flat washer and the cotter
pin as shown to the right.
NOTE: Insert shows cotter pin attached to the
underside of the axle support.
3. Next, align back hole of the yoke with steering
link and secure into place using one (1) M13x18
bolts, M10 washer, and M10 lock nut as shown in
diagram B.
Parts List and Tools Required
Socket/Wrench Set
Pliers
4
Front Axle Assembly
A
Steering Link
M13x18 Bolts (3)
Yoke
Yoke
Steering
Link
M10 Washers (3)
Steering Link (1)
M11 Washer (1)
Underside
Step 2
View
Cotter Pin
& Washer
B
M10 Locknuts (3)
Cotter Pin (1)
Revision date: 05.30.19
Advertisement
