Controlling Sesto Senso 2 With Eagle Or Computer With Windows Os - PrimaLuceLab SESTO SENSO 2 User Manual

P r i m a L u c e L a b i S r l

Controlling SESTO SENSO 2 with EAGLE or computer with Windows OS

SESTO SENSO 2 can be controlled with the EAGLE or any external computer that comes with Windows operative system
(at least version 7 64 bits). In the SESTO SENSO 2 package you can find a 12V power cable with cigarette plug and a PC
connection cable for USB port. Connect the USB-C cable to the USB port of your EAGLE or personal computer. You will see
If you can't find it, Windows is not able to automatically install the SESTO SENSO 2 driver. In order to do this, please follow
this procedure:
1) go to "Device Manager"
2) locate "CP2102N USB to UART Bridge Controller" under "Other devices"
3) make a mouse right-click and select "Update Driver Software"
4) select the second option "Browse my computer for driver software" in order to install the driver from a specific folder
5) select the folder where you saved the content of the SESTO SENSO 2 software package you downloaded from our
website
Please remember to unzip the file you downloaded before starting the installation of the SESTO SENSO 2.
6) at the end of the procedure, a message will appear indicating the correct installation.
Now, under "COM and LPT devices", you will see a new COM port (in this example COM16) which is the one used by your
computer to communicate with SESTO SENSO 2.
If the driver is not correctly installed in your Windows operative system, SESTO SENSO 2 won't be able to connect to
your EAGLE or external computer and it won't work. So please check that the COM driver is correctly installed before
www.primalucelab.com/astronomy/downloads
NOTE
proceeding to the next step.
p a g e 6
S E S T O S E N S O 2 u s e r m a n u a l
the PWR LED on (this means SESTO SENSO 2 is powe-
red) and, after a few seconds the Wi-Fi LED will be on
too and this means that also the SESTO SENSO 2 WiFi
connection is ready to be used.
When you connect it to USB port of the EAGLE or of an
external computer, SESTO SENSO 2 should be automa-
tically detected and Windows should automatically
install the new driver. In order to check this, please go
to Control Panel and then choose Device Manager. You
should see the SESTO SENSO 2 listed under "Ports
(COM & LPT)" and described as "Silicon Labs
CP210x" (in order to check, you can disconnect and
then reconnect the SESTO SENSO 2 USB cable and see
how Windows lists it).