PrimaLuceLab SESTO SENSO 2 User Manual page 15

P r i m a L u c e L a b i S r l
Tap and keep your finger on one of the empty buttons: the position will be auto-
matically saved with a "Preset" name.
Tap on the name of the button and you will be able to change it by using the vir-
tual keyboard of your device. Press ENTER button to confirm the new name.
When you save the focus position in the SESTO SENSO 2 Virtual HandPad, you will find the same positions when you
will control the SESTO SENSO 2 with USB from your EAGLE or external computer.
In any case, if you want to reset the SESTO SENSO 2 manually, when the SESTO SENSO 2 is powered on please press
the button RST (Reset) for 10 seconds. SESTO SENSO 2 will reboot and it will be reset to factory settings.
By pressing the top-left button in the SESTO SENSO 2 Virtual HandPad main
screen, the option menu will appear. Here you will be able to set:
1) LED dimming: you can change the SESTO SENSO 2 LED lights intensity to the
value you prefer. LED status will be automatically stored in the SESTO SENSO 2
electronics.
2) Calibration: if you want to redo the calibration, by pressing this button you will
re calibrate SESTO SENSO 2 again.
3)Advanced settings: here you can set the advanced settings of your SESTO
SENSO 2 unit, please refer to the previous paragraphs to understand the use of
the advanced settings.
NOTE
ATTENTION
p a g e 1 4
S E S T O S E N S O 2 u s e r m a n u a l