PrimaLuceLab SESTO SENSO 2 User Manual page 9

P r i m a L u c e L a b i S r l S E S T O S E N S O 2 u s e r m a n u a l
Having connected SESTO SENSO 2 to a USB port of your EAGLE or Windows computer and powered with an external po-
wer source (a 12V battery by using the supplied cigarette plug cable, a 12V AC adapter with at least 1A and Ø5.5/2.5mm
connector or the EAGLE power cable to power it through the EAGLE), pleas select "FOCUSER Manager" software to start it
and you will see this interface:
On the left, select the COM port number your compu-
NOTE on internal temperature values
ter assigned to the SESTO SENSO 2 and click on the
"Open/Close" button. You will see the lights on the
Here you can read the internal motor temperature, it's normal
right become green. If you connected also the optional
to see values from 10 to 50 °C.
temperature sensor, you will get the green light also in
correspondence to the "External temperature" row.
What happens if I can't connect by pressing the "Open/Close" button?
At this stage, if you can't connect to SESTO SENSO 2 by pressing the "Open/Close" button, please check the COM port
number that your EAGLE or personal computer assigned to the SESTO SENSO 2. In order to do that, please go to Control
Panel -> Device Manager and search for the SESTO SENSO 2 COM port number. This is the number you have to select in
the FOCUSER Manager software, before starting the connection.
p a g e 8