Vizio SmartCast R-SB3651-E6 Quick Start Manual page 19

Function
Surround Balance
Two center LEDs
Surr Bal
indicate Surround
Balance is centered.
Subwoofer Levels
Two center LEDs
indicate subwoofer
Subwoofer
level 0.
Equalizer Mode
EQ
Surround On/Off
Surnd
DTS TruVolume
On/Off
TruVol
Night Mode On/Off
Night
AV Delay
LED at the bottom
indicates no delay.
AV Delay
LED Behavior
Press the Next/Previous button to increase/decrease the surround balance level on each
side. The LED indicators will move to the top with balance levels to the right and down
with balance levels to the left.
Press the Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the top with increasing levels and to the bottom
with decreasing levels.
Note: Decreasing the level to the minimum turns off the subwoofer
Press the Next/Previous button to toggle between 3 preset equalizer settings,
Music, Direct and Movie.
Note: Movie mode is on by default.
Press the Next/Previous button to enable/disable surround sound. When
enabled (On), Direct and Movie mode will produce 5.1 surround sound. Music will
Surround On
produce 3.1 surround sound. When disabled (Off), the satellite peakers will be
disabled. Note: If EQ mode is set to Direct and Surround is set to Off, the sound
Surround Off
bar will output 2.1 audio without center or satellites.
Press the Next/Previous button to enable/disable TruVolume. When enabled
TruVolume On
(On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
TruVolume Off
Note: Default is setting is Off
Press the Next/Previous button to enable/disable Night Mode. When enabled
Night Mode On
(On), the sound bar will lower bass frequency levels to provide a more quiet envi-
ronment (ideal for apartment living and homes with sleeping children).
Night Mode Off
Press the Next/Previous button to increase/decrease the amount of audio delay.
The LED indicators will move to the top with increasing audio delay levels.
Description
English - 19