ZALMAN CNPS8700 NT User Manual page 5

4) Cooler Installation
Slide the Clip Lever(④) onto the Clip's(③) Groove for Intel. Align and connect the Clip' s Lug Slot with the
Arrow Marked Lug on the Clip Support for Socket 775. Press onto the Clip Lever when aligning the Clip
Lever' s Lug Slot with the Lug. Make sure that the cooler is installed on the center of the CPU.
Groove for Intel
Clip,③
5) Power Connection
◆ Please refer to "9. Power Connection" on page 5.
8. Installation (AMD Socket AM2/754/939/940)
1) Clip Installation
Insert the Clip(③) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the
Base Cover's projecting part. Now attach the Clip so that its central hole slides over the projecting part of the
Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the
fan could lead to product damage.
2) Thermal Grease Application
Clear off particles or any residue from the top of the CPU then
spread a sufficient amount of the included Thermal Grease(②)
on top of the CPU.
The specifications of any product may change without prior notice to improve performance.
※
Clip's Lug Slot
Clip Lever,④ Arrow Marked Lug
Groove for AMD
Clip Lever,④
Lug
4