Advertisement

User's Manual
CNPS8000A
Intel Socket 1366 / 1156 / 775 CPU
AMD Socket AM3 / AM2+ / AM2 CPU
To ensure safe and easy installation,
please read the following precautions.
www.ZALMAN.com
Core i7 Extreme
Core i7
Core i5
Core i3
Core 2 Quad
Core 2 Duo
Core 2 Extreme
Dual Core Pentium
Pentium D
Pentium 4
Celeron D
Phenom II
Phenom
Athlon II
Athlon X2
Athlon FX
Athlon
Dual-Core Opteron
Sempron
Ver. 1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CNPS8000A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZALMAN CNPS8000A

  • Page 1 User’s Manual CNPS8000A Intel Socket 1366 / 1156 / 775 CPU Core i7 Extreme Core i7 Core i5 Core i3 Core 2 Quad Core 2 Duo Core 2 Extreme Dual Core Pentium Pentium D Pentium 4 Celeron D AMD Socket AM3 / AM2+ / AM2 CPU...
  • Page 2: Specifications

    Product design and specifications may be revised to improve quality and performance. Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
  • Page 3: Common Components

    4. Components 1) Common Components Cooler Backplate Nuts User’s Manual Side Caps Loading Block Double-sided Tape Thermal Grease Fan Mate 2 Fan Mate 2 Cable Double-sided Tape 2) Intel Components 3) AMD Components Socket 775 / 1156 / 1366 Socket AM3 / AM2+ / AM2 Intel Clip AMD Clip .COM...
  • Page 4: Installation

    5. Installation 1) Intel Socket 1366 / 1156 / 775 Installation Insert the Intel Clip between the Cover and the Base, and then fasten the Bolts. Install Bolts to the Backplate according to the Socket Type and secure with Side Caps. Socket 775 Socket 1156 Socket 1366...
  • Page 5 Attach Double-sided Tape to the Loading Block and remove the Double- sided Tape Cover. Double-sided Tape Caution Please make note of the orientation of the Loading Block’s Installation. Socket 1366 / 1156 Installation Attach Double-sided Tape to the center of the Backplate and remove the Double-sided Tape’s Cover.
  • Page 6 Apply the enclosed Thermal Grease to the CPU’s surface and install the Cooler by fastening the Bolts. 2) AMD Socket AM3 / AM2+ / AM2 Installation Insert the AMD A Clip between the Cover and the Base, and then fasten the Bolts.
  • Page 7 Remove the Sticker Cover from the Lower Tier of the Loading Block and attach to the Backplate. Loading Block Attach Double-sided Tape to the Loading Block and remove the Double- sided Tape Cover. Double-sided Tape Caution Take note of the orientation of the Nuts and the Side Caps. Disassemble the motherboard’s Clip Support.
  • Page 8 Align the Backplate Nuts with the motherboard’s Clip Support installation holes and fasten to the motherboard. Apply the enclosed Thermal Grease to the CPU’s surface and install the Cooler by fastening the Bolts. 6. Fan Mate 2 Installation and Usage 1) Fan Mate 2 Installation Fan Mate 2 can be installed to the Connect the motherboard and...
  • Page 9 2) Fan Mate 2 Usage Fan Speed Control Knob Rotating the Fan Speed Control Knob for RPM control. BIOS booting error In case you get a BIOS error beep: Rotate the Fan Speed Control Knob to its maximum setting. Disable CPU Fan Detected in BIOS setting or set the system monitoring program’s CPU Fan RPM to the lowest setting.

Table of Contents