Safely Disconnecting The Probe From An Oscilloscope - Keysight InfiniiMax III+ N7000 Handling Manual

Safely Disconnecting the Probe from an Oscilloscope

Safely Disconnecting the Probe from an Oscilloscope
Always disconnect the probe head from the probe amplifier before:
• disconnecting the probe amplifier from the oscilloscope.
• moving the probe amplifier from one oscilloscope channel to another.
Never allow the probe head to be connected to the probe amplifier, if the probe amplifier
CAUTION
is not connected to the oscilloscope channel.
Figure 5
8
Probe Improperly Disconnected from Oscilloscope While Probe Head is Con-
nected to the Probe Amplifier
N7000/1/2/3A InfiniiMax III+ Handling Guide