Auto-Off Function - LaserLiner MultiWet-Master Compact Plus Operating Instructions Manual

13
LCD backlight
LED display illumination can be varied with 3 different settings:
AUTO: Display illumination switches off during periods of inactivity and
switches on again automatically for measurement procedures.
ON: Display illumination remains on permanently.
OFF: Display illumination remains off permanently.
The setting is stored and remains in effect until it is changed manually.
2 sec
14 AUTO OFF function
The AUTO-OFF function has 3 different settings:
ON: The device switches off automatically after 3 minutes
OFF: The device does not switch off automatically
AUTO: The device does not switch off automatically; after switching off
manually, this function is set back to „ON" and, after switching on,
the device again switches off automatically after 3 minutes.
2 sec
28
EN
9x
10x