Drive System; 4-3.2 Motor Installation - Big Joe Joey J1 Series Maintenance And Repair Parts Manual

R7007
3. Disconnect harness (1,
(6, 7 and 8, Figure 11-15
steer motor.
4. Remove three screws (7,
washers (6) and three flat washers (5) from under
the vehicle.
5. Remove the steering motor from the top of the
vehicle.
4-3.2. Motor Installation.
1. Position the steering motor in the top of the motor
compartment.
BL-J1-0315 - 11-19-2019
Figure 4-3 Drive System
Figure 11-14) and cables
or Figure 11-16) from the
Figure 4-3) three lock
R7007A
2. Secure the motor with two screws (7,
two lock washers (6) and two flat washers (5)
from under the vehicle.
3. Reconnect harness (1,
(6, 7 and 8, Figure 11-15
steering motor.
4. Install the compartment cover as described in
paragraph 4-2.2.
5. Disengage the emergency power disconnect
switch (6, Figure
Figure
Figure 11-14) and cables
or Figure 11-16)) to the
11-8) and turn on key switch (3).
4-3)
4-3