Big Joe Joey J1 Series Maintenance And Repair Parts Manual page 15

Big Lift LLC.
1060 N. Garfield St.
Lombard, IL 60148
MODEL:
DEALER:
Lift cylinder is free of damage, no evidence of leaks and that all hardware is secure and undamaged.
All hydraulic hoses, fittings and components are properly secured and that there is no evidence of leaks.
Ensure fluid level is correct in hydraulic tank.
Ensure hydraulic pump is secure and undamaged, operates properly and is free of leaks.
Ensure hydraulic control valve is secure and undamaged, operates properly and is free of leaks.
Ensure hydraulic oil breather/vented cap is clean, hydraulic tank cap is tight and vent is open.
Ensure battery fluid level is correct (if applicable).
Visually inspect motors to ensure there is no damage.
Ensure battery charger scrolls through diagnostics when plugged in.
Ensure all electrical connections are tight, free of frays and corrosion.
Ensure battery meets weight and voltage requirements.
Ensure drive, load and caster wheels are properly installed, secure and do not have excessive wear.
Ensure all five wheels have contact with the floor.
Ensure the electronic brake operates properly.
Ensure paint is in good condition and that there are not any issues with the overall appearance of the
task support vehicle.
Inspect overall structural condition including welds.
Verify that no unauthorized modifications or additions have been made.
Grease and lubricate the mast channel per maintenance manual.
Ensure stability pads at base of unit (adjacent to caster wheels) are intact, properly secured and have
not sustained any damage
Ensure optional equipment such as anchor point, tether, full body harness and tow hitch are in good
condition and fully functional (if applicable).
Inspect front and rear load trays for functionality and damage.
Ensure ANSI/ SIA A92.6 manual of responsibilities, operations manual and service manual are in weather
resistant pouch on vehicle.
Ensure data plate is in place, secured and legible
Ensure all instruction and safety decals are installed, secure and legible.
The undersigned certifies that this machine has been inspected, per each area of inspection, and any and all discrepancies have been
brought to the attention of the Owner / User, and that all discrepancies have been corrected prior to any further use of this machine.
OWNER / USER
SIGNATURE:
DEALER
SIGNATURE:
VERSION G
BL-J1-0315 - 11-19-2019
J1 - Task Support Vehicle (TSV)
Annual Inspection Report
VEHICLE INFORMATION:
SERIAL:
HYDRAULIC SYSTEM
POWER and DRIVE SYSTEM
GENERAL
MANUALS - DECALS - DATA PLATE
ADDITIONAL COMMENTS
OWNER / USER
PRINTED NAME:
DEALER
PRINTED NAME:
MAST SIZE:
OWNER / END USER:
www.bigjoesupport.com
HOUR METER:
P F C
P F C
P F C
P F C
Page 2-7
DATE:
DATE:
PAGE 2 OF 2
2-7