JOCCA 6163 Instruction Manual page 8

14-E
and contact JOCCA, as the guarantee covers any damage from ori-
gin or manufacturing defects.
-This product is only indicated for domestic use. Do not use the
appliance outdoors. Never leave the appliance exposed to climatic
agents such as rain, snow, sun, etc...
-This appliance is intended to be used only by adults. Do not allow
people not accustomed to this kind of appliances, handicapped peo-
ple or children to use this item.
-Should not be used by children, people with heart problems, throm-
bosis, serious bodily injury, ultimately if a person has any serious
medical problems consult with a doctor.
-Remember that this product has been invented not to treat but to
provide relaxation.
-Before connecting the appliance to the mains, check that the cable
and plug are in perfect conditions. Also check that the voltage indi-
cated on the appliance is valid for your electrical installation. Plug the
deep fryers into a socket with an earthing connection.
-If you detect that the power supply cable or the plug are damaged,
do not use the appliance or try to replace the cable yourself. Go
directly to the authorised JOCCA technical service where they will
replace it correctly for you.
-Do not immerse the appliance or any part of it in water or any other
liquid.
-To avoid overheating, it is advisable to unroll completely the power
cable and to disconnect the plug from the mains when the appliance
is not in use.
-If for any reason you feel that the heat provided by a device is exces-
sive, move away your body from a mattress immediately.
-Do not pull the cable to unplug the appliance from the mains,
always pull from the plug.
-For your safety and for the appliance to work correctly, always use
JOCCA spare parts and accessories.
-Always unplug a device from electrical network when finish it using,
before its cleaning and if it does not work correctly.
-Do not use a device if it is wet; do not leave a device under the
exposure of weathering such as rain, sun, snow etc.
-Do not insert pins into a mattress
-Do not use a product if it is wrinkled or folded.
-A prolonged use with maximum level of regulation can lead to
burns on the skin. Never sleep on an operating mattress.
-Check a device frequently for signs of wear or damage. If such signs
exist or a device has been used improperly, consult a distributor befo-
re any further use.
-Do not use a device neither with wet or sweat body nor with wet feet
or hands.
INSTRUCTIONS FOR USE
-First of all before you plug in a device check if it is in perfect condi-
tion.
-Connect the incorporated adaptor CA/CC to a remote control and
connect another end of the adaptor to an electricity network as it is
shown on the figure.
-Then connect a remote control to a mattress, making sure the pins
match the holes.
-Place a massage mattress where you wish to use it and make your-
self comfortable on it.
-Take a remote control and press the button I/O, a pad will be acti-
vated automatically and a pilot light will be switched on indicating
that a device is in operation.
-A mattress has 5 massage programs and 3 intensity levels that can
be chosen by a remote control.
- Pressing the button MODE (F1-F5) you can select a massage pro-
gram from 1 to 5 passing through F1, F2, F3, F4 and F5.
-When a massage program has been selected, it is possible increa-
se its intensity up to 3 times more pressing the button
I: low intensity
II: medium intensity
III: high intensity
-Besides you can select a zone you wish to massage: neck, lower
back, the back and legs, selecting each zone by a remote control.
You just have to press a button of each zone and it will be activated.
A pilot light will indicate you a selected massage zone.
-Finally press a button to activate the heating function – a pilot
E-15