Installing Three Crossfirex Tm -Ready Graphics Cards - ASROCK Taichi B550 User Manual

B550 Taichi
TM
2.9.2 Installing Three CrossFireX -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot,
another graphics card to PCIE3 slot, and
the other graphics card to PCIE5 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Use one CrossFire Bridge to connect
the graphics cards on PCIE1 and PCIE3
CrossFire Bridge
slots, and use the other CrossFire Bridge
to connect the graphics cards on PCIE3
and PCIE5 slots. (The CrossFire Bridge
is provided with the graphics card
you purchase, not bundled with this
motherboard. Please refer to your graphics
card vendor for details.)
Step 3
Connect a VGA/DVI/DP/HDMI cable
from the monitor to the corresponding
port on the graphics card installed to the
PCIE1 slot.
45