Tm And Quad Crossfirex; Operation Guide; Installing Two Crossfirex Tm -Ready Graphics Cards - ASROCK Taichi B550 User Manual

TM
2.9 CrossFireX

Operation Guide

This motherboard supports CrossFireX
TM
CrossFireX that allows you to install up to three identical PCI Express x16
graphics cards.
1. You should only use identical CrossFireX
certified.
2. Make sure that your graphics card driver supports AMD CrossFireX
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFireX
operate as 12-pipe cards while in CrossFireX
5. Different CrossFireX
TM
reX . Please refer to AMD graphics card manuals for detailed installation guide.
2.9.1 Installing Two CrossFireX
CrossFire Bridge
, 3-Way CrossFireX
TM
, 3-way CrossFireX
TM
TM
Edition card with a 16-pipe card, both cards will
TM
cards may require different methods to enable CrossFi-
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
TM
and Quad CrossFireX
TM
and Quad
-ready graphics cards that are AMD
TM
technology.
TM mode.
B550 Taichi
TM
43