Iiyama ProLite T2454MSC User Manual page 20

Extra
Adjustment Item
Reset
Signal Select
NOTE
At selected the AUTO, it will automatically be selected when just one source is available.
If there are more input sources available and you select one of them, the AUTO option is
not available.
If multiple inputs are connected, the monitor may not recover the last one used after
turning it off and on again.
It is only possible when you set a specific source.
1
Audio Input*
Opening Logo
LED
NOTE Turn Off the Power Indicator when you are bothered by the light.
2
Overdrive*
Information
1
* Suitable for HDMI input only.
2
* When Overdrive is activated, some level of image retention will be caused.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
 Signal Select: Press the AUTO button when the Menu is not displayed, it shows following Menu.
Signal select is switched by pressing the AUTO button successively.
16 OPERATING THE MONITOR
PICTURE ADJUST EXTRA
GEOMETRY
COLOR SETTINGS
OSD
EXTRA
Problem / Option
Factory-preset data is restored.
Yes
No Return to Menu.
Auto Select the signal input automatically.
Direct Select the Analog input.
VGA
HDMI Select the Digital (HDMI) input.
HDMI Select the HDMI input.
LINE IN Select the LINE IN input.
iiyama Logo does not display when the monitor is
Off
turned on.
On iiyama Logo displayed when the monitor is turned on.
Off
The Power Indicator is turned Off.
On The Power Indicator is turned On.
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Displays information regarding the current input signal coming
from the graphic card in your computer.
NOTE
See your graphic card user guide for more information
about changing the resolution and refresh.
SELECT INPUT SOURCE
ProLite T2454MSC
RESET YES NO
SIGNAL SELECT HDMI
AUDIO INPUT HDMI
OPENING LOGO
OFF
LED OFF
OVERDRIVE ON OFF
INFORMATION
AUTO VGA HDMI
Button to Press