Operating The Monitor - Iiyama ProLite T2454MSC User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 25. You are also able to adjust the picture by following
the button operation shown below. For more detailed adjustments, see page 18 for SCREEN
ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the + / - Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight
the desired adjustment icon.
Press the MENU Button again. Use the + / - Buttons to make the appropriate
adjustment or setting.
Press the AUTO Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for vertical position, select Menu item of Geometry and then press the
MENU Button. Then, select Vertical Position by using the + / - Buttons.
An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the AUTO Button lastly, it ends, all changes are saved in the memory.
NOTE
 When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the Timeout has passed. Also, the AUTO button can be used to return previous menu
and turn off the On-Screen Display.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
 Adjustments for Horizontal / Vertical Position, Pixel Clock and Phase are saved for each signal
timing. Except for these adjustments, all other adjustments have only one setting which applies to
all signal timings.
ProLite T2454MSC
GEOMETRY
PICTURE ADJUST
GEOMETRY
PIXEL CLOCK
COLOR SETTINGS PHASE
HORIZONTAL POSITION
OSD
VERTICAL POSITION
EXTRA
ASPECT FULL
OPERATING THE MONITOR 11