Adjusting The Viewing Angle - Iiyama ProLite T2454MSC User Manual

ADJUSTING THE VIEWING ANGLE

NOTE
 Do not touch the Touch screen when you change the angle. It may cause damage or
break the Touch screen and LCD screen.
 Careful attention is required not to pinch your fingers or hands when you change the
angle.
 For optimal viewing it is recommended to look at the full face of the monitor.
 You are able to adjust the monitor's height up to 388mm - 128mm, angle up to 90 degrees upward
and 5 degrees downward.
 Hold the stand so that the monitor does not topple when you change the monitor's angle.
Place the monitor on a flat surface.
Hold the panel so the monitor does not topple.
We recommend that you adjust the stand to its lowest position when using the monitor in the
90 degree upward tilt position.
128mm
10 BEFORE YOU OPERATE THE MONITOR
Upward
5°
90°